JessEm Tool Company Mast-R-Lift II Router Lift - 02120

Description

The Mast-R-Lift II has 5 double sealed bearings. The lift adds tension to the threaded spindle to remove backlash and vibration, and prevent setting changes while routing. Includes a dedicated locking mechanism for heavy duty, long term routing operations, accessible from the top of the top surface and is engaged with the same crank handle used to raise and lower the Lift. The Mast-R-Lift II also fits most fixed base routers on the market today without the use of an adaptor collar. The unique clamping blocks enable users to use different fixed base routers with the Lift as opposed to dedicating a router. All of our top plates on our Lifts are hard anodized. This is an engineered surface treatment and not just a cosmetic sulphuric treatment that will wear off. The shafts on the Mast-R-Lift II are pressed into a shaft mount with hydraulic pressure, not just threaded to the top plate.
By pressing the shafts into a larger diameter mount we are able to attach the shafts to the top plate and fasten in place with more than just one screw spreading the lateral load and providing a very rigid and durable mount that will withstand the toughest routing operations. The Mast-R-Lift II provides for above the table bit changes for all routers without the need for bent wrenches. All the machined components are machined on one of our CNC machining centers in Barrie, Ontario Canada, and all the aluminum non wear components are anodized for appearance, corrosion resistance and some wear resistance. Mast-R-Lift II includes 1 insert wrench, 1 starter pin, 2 hex keys, 10 leveling screws, and 1 crank handle, plus three (3) insert rings: 2", 2-1/2", and 1-3/8". JessEm's all new 10 Piece insert ring set includes: Blank, 1/4", 3/8", 1/2", 3/4", 1", 1-1/4",1-1/2", 1-3/4" and 2-1/4". All rings feature JessEm's standard Tab-Lock design. The convenient storage caddy will hold 14 rings. A total of thirteen (13) rings are included in this complete package.