Jobu Design Replacement Foot for Select Nikon FL E-Series Lenses

Description

Jobu Design Replacement Foot - 2x M3x0.5 Safety Screws - M2.5 Hex Wrench - Jobu Design 5 Year Warranty
Machined from 100% 6061-T6 'aircraft' aluminum
2pcs M3x0.5 safety screws to prevent the foot (and lens!) from sliding out catastrophically from a gimbal head or ball head
Premium M2.5 T-handle Allen Hex wrench for installing the foot and safety screws
Hard anodized black satin finish
with a lightweight camera) Nikon 600mm F4E FL Nikon 800mm F5.6E FLThis foot is rather taller and longer than we would normally design, but leave it Nikon to make this a challenge. The new E-series FL lenses have a large diameter lens hood and a neoprene cover which need to be cleared by the foot. The lens foot is also positioned far back on the barrel of the lens making it necessary to extend the foot a full 7" long to balance properly with light camera bodies. This lens foot may fit older (or future unannounced models) of Nikon lenses. All Nikon lenses appear to have the same mounting pattern and screw size, so verification is mainly a matter of checking balance and clearance for the lens hood.